|This Pre-stressed Concrete Spun Pole Steel Mould is used for
electronic concrete pole making. Its mainly manufacture technology
is longitudinal tension by steel wires. Then it can squeeze out the
excess water in the concrete under the centrifugal force. Thus, it
can greatly improve the concrete density and strength.|
In order to form the concrete more quickly to meet the design
strength of more than 70%, steam curing can be carried out so as to
shorten the mould-releasing cycle.
Our factory products two categories of Pre-stressed concrete pole
steel moulds, DMZ&DMD. The Pre-stressed Electric Poles by this
series equipment comply with the China Standard JC/T364-2001.
|1. The steel mould should work together with pole spinning machine.
The steel mould should be placed on the spinning machine smoothly.|
2. Put the mixed slurry into the mould and rotate in different
directions under the motor driven.
3. In this process, the redundant water in the concrete is released
by the force of centrifugal, and the concrete is dense and high
strength. And then, the pole forms around the inner wall of the
|Conical electric pole steel mould|
|Inner diameter of top end (mm)||Length (m)||Tread (m)||Running Wheel Diameter (mm)||Length (m)||Tread (m)||Running wheel diameter (mm)|
|1. Welding technology, this enhances the smooth finish of the mould
wall, and eliminates the uneven traces of rivet holes. So the
concrete poles appearance will be improved significantly.|
2. The cylinder is changed to U-type longitudinal stiffeners which
can greatly increase the stiffness and flexural strength of the
3. Install the slot with rubber sealing strip, in order to prevent
leakage to ensure quality.
|For more information please contact us: firstname.lastname@example.org and email@example.com|